Abstract
In this paper, an Improved Pelican Optimization Algorithm (IPOA) was proposed to optimize a BP neural network model to predict the dielectric loss factor of wood in the RF heating and drying process. The neural network model was trained and optimized using MATLAB 2022b software, and the prediction results of the BP neural network with POA-BP and IPOA-BP models were compared. The results show that the IPOA-optimized BP neural network model is more accurate than the traditional BP neural network model. After the BP neural network model with IPOA optimization was used to predict the dielectric loss factor of wood, the value increased by 4.3%, the MAE decreased by 68%, and the RMSE decreased by 67%. The results provided by the study using the IPOA-BP model show that the prediction of the dielectric loss factor of wood under different macroscopic conditions in radio frequency heating and drying of wood can be realized without the need for highly costly and prolonged experimental studies.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.