Abstract
Supersonic separation is a novel technology. A multi-fluid slip model for swirling flow with homogenous/heterogenous condensation and evaporation processes in the supersonic separator was built to estimate the separation efficiency. This model solves the governing equations of compressible turbulent gas phase and dispersed homogenous/heterogenous liquid phase considering droplet coalescence and interphase force. Its prediction accuracy for condensation and swirling flows was validated. Then, the flow field, slip velocity and droplet trajectory inside the separators with different swirl strengths were investigated. The maximum values of radial slip velocity are 29.2 and 8.26 m/s for inlet foreign droplet radius of 1.0 and 0.4 µm. It means the larger foreign droplet has a better condensation rate. However, the residence time of larger foreign droplet in core flow is shorten. Thus, the inlet radius of foreign droplet has to be moderate for best separation efficiency. Finally, the dehydration performances of separator were evaluated. The optimal radius of inlet foreign droplet to maximize the dehumidification and efficiency was found. For the separator with swirl strength of 22%, the optimal radius is 0.85 µm at inlet pressure of 250 kPa, where the maximum dew point depression is 42.41 °C and the water removal rate is 87.82%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.