Abstract
AbstractIn this study, a computational fluid dynamics (CFD) model was developed to simulate the aerodynamic performance of the National Renewable Energy Laboratory (NREL) offshore 5‐MW baseline wind turbine with single rotor and full wind turbine. Using statistical methods, the relation between pitch angle and performance when the speed is above the rated wind speed was analyzed; furthermore, other published data were compiled to establish the functional equations of power, thrust with various inflow wind speeds, and pitch angles. In addition, according to shape optimization based on parametric modeling, the two‐dimensional cross‐section of the wind turbine blade can be defined through a metasurface approach, and the three‐dimensional surface modeling of the wind turbine blade, nacelle, and tower is completed using the nonuniform rational B‐splines (NURBS) interpolator. In terms of aerodynamic simulation, the unstructured polygon mesh was used herein to discretize the space and simulate the highly curved and twisted surfaces of the blade. In this study, the compact and accurate mesh form obtained through a grid independence test will be used to analyze the distribution of the pressure coefficient, shear stress coefficient, and limited streamline on the blade surface at various inflow wind speeds and pitch angles to understand the differences between different turbulence models and the causes of power and thrust attenuation at high inflow wind speeds. In addition, the phenomena of blade‐tip vortices, dynamic stall, blade loading, and the interaction between nacelle and tower were collectively explored.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.