Predicting the Simultaneous Oxidation of Ammonia, Nitrite, and m-cresol and Microbial Growth in a Sequencing Batch Reactor with a Kinetic Model Using Inhibition and Inactivation Effects.

Abstract

The kinetic model derived in this study was able to adequately predict the simultaneous oxidation of ammonia, nitrite, and m-cresol and microbial growth using nitrifying sludge in a sequencing batch reactor. Time-varying inhibition and inactivation effects were successfully incorporated in the process kinetics to account for the past cell exposure history to m-cresol increasing concentrations (up to 150 mg C L-1). The initial concentration of the microbial species (ammonia and nitrite oxidizers, heterotrophs) was evaluated using pyrosequencing of DNA samples of the consortium. These measurements allowed to establish a model that explicitly handles specific reaction rates and to enhance the practical identifiability of the model parameters. A single simulation run was used to adequately predict the kinetic behavior of the main variables throughout the 242 cycles using a single set of initial conditions in the first cycle. This kind of dynamic model may be used as a helpful predictive tool to improve nitrification by avoiding the occurrence of severely repetitive inhibitive conditions due to the presence of inhibitive/toxic aromatic compounds.