Abstract
In this study, finite element analysis (SAP2000 program) was used to investigate the relationship between the pressure and leakage area in 90° pipe elbows with longitudinal, spiral, and circumferential cracks. The results show that leakage areas expand linearly as the internal pressure increases and its inclination is called the pressure–area slope (m). A sensitivity study was conducted to recognize the influence of different parameters (inside diameter, wall thickness, modulus of elasticity, longitudinal stress, Poisson’s ratio, and finally crack orientation) on both m and leakage exponent (N). The results reveal that the elasticity modulus has the dominant impact on m, followed by elbow wall thickness, and then elbow inside-diameter. The Poisson’s ratio and the longitudinal stress have an insignificant influence on m. Moreover, the slope m varies more in the longitudinal and spiral cracks than the circumferential cracks. The amount of leakage through the different cracks is a function of the internal pressure raised to an exponent ranging from 0.5 to 1.01. An attempt was made to find empirical equations to express the pressure–area slope as a function of elbow properties and crack orientation. The study’s findings were checked against numerical and experimental results and good correlations were obtained.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have