Abstract
We evaluated the performance of microemulsions for a heavy oil reservoir with respect to the geochemistry inherent. Two microemulsion (ME) formulations were prepared from Gemini surfactant, heavy oil (API 16.6°) and saline water and further injected in a Berea sandstone. Monitoring the ionic composition of the effluent water showed that the emulsion cut and the sludge deposition were both subsequent to the degradation of the formulation, owing to the dissolution of feldspar due to the water acidity. As per the modeling study, a weak and reversible cation exchange between sodium (Na+) and calcium (Ca2+) was highlighted. Herein was shown that Na+ could prevent and/or mitigate the heightened adsorption of ME to the rock surface. A mildly basic pH for controllable anorthite and albite precipitation plus silica cementation due to sludge formation. We hypothesized that feldspar alteration has an antagonistic effect on the oil expulsion efficiency and ME adsorption. Anhydrite alteration affects CEOR negatively due to high divalent ions causing high ME degradation due to adsorption. Whereas, albite, anorthite and silicate precipitation promotes high recovery and less ME adsorption, due to high Na+ and K+ ions. Silica cementation was proven to increase formation rock wettability. Hence, to achieve high oil recovery and minimal surfactant loss due to adsorption, we propose a high and stable Na+ presence.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.