Abstract

Thermoacoustic instability is a plaguing problem encountered in many combustion systems. The large-amplitude acoustic oscillations, which are a noted aspect of this instability, can have a detrimental effect on the performance of the system; and they sometimes even cause lasting damage to the system components. The aim of this study is to estimate the amplitude of the limit-cycle oscillations observed during thermoacoustic instability corresponding to the axial acoustic modes using pressure measurements acquired during stable combustion. First, an equation is derived that describes the slow-varying amplitude of oscillations in certain reduced-order models of combustion systems involving vortex shedding. Subsequently, a procedure is detailed, wherein this equation is used in conjunction with the measured pressure time series and some information about the system to predict the instability amplitude. The estimation capability of this technique is then tested using acoustic pressure data obtained from laboratory-scale bluff-body and swirl-stabilized combustors. It is observed that the estimated amplitudes are in good agreement with actual values.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.