Abstract
A random forest regression (RFR) model was applied to over 12,000 wells with measured fluoride (F) concentrations in untreated groundwater to predict F concentrations at depths used for domestic and public supply in basin-fill aquifers of the western United States. The model relied on twenty-two regional-scale environmental and surficial predictor variables selected to represent factors known to control F concentrations in groundwater. The testing model fit R2 and RMSE were 0.52 and 0.78 mg/L. Comparisons of measured to predicted proportions of four F-concentrations categories (<0.7 mg/L, 0.7–2 mg/L, >2 mg/L – 4 mg/L, and > 4 mg/L) indicate that the model performed well at making regional-scale predictions. Differences between measured and predicted proportions indicate underprediction of measured F at values by between 4 and 20 mg/L, representing less than 1% of the regional scale predicted values. These residuals most often map to geographic regions where local-scale processes including evaporative discharge in closed basins or intermittent streams concentrate fluoride in shallow groundwater. Despite this, the RFR model provides spatially continuous F predictions across the basin-fill aquifers where discrete samples are missing. Further, the predictions capture documented areas that exceed the F maximum contaminant level for drinking water of 4 mg/L and areas that are below the oral-health benchmark of 0.7 mg/L. These predictions can be used to estimate fluoride concentrations in unmonitored areas and to aid in identifying geographic areas that may require further investigation at localized scales.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have