Abstract

Carbon dioxide (CO2) capture and storage have attracted global focus because CO2 emissions are responsible for global warming. Recently, injecting CO2 into shale gas reservoirs is regarded as a promising technique to enhance shale gas (i.e., methane (CH4)) production while permanently storing CO2 underground. This study aims to develop a calculation workflow, which is built on the simplified local-density (SLD) model, to predict excess and absolute adsorption isotherms of gas mixture based on single-component adsorption data. Such a calculation workflow was validated by comparing the measured adsorption of CH4, CO2, and binary CH4/CO2 mixture in shale reported previously in the literature with the predicted results using the calculation workflow. The crucial steps of the calculation workflow are applying the multicomponent SLD model to conduct regression analysis on the measured adsorption isotherm of each component in the gas mixture simultaneously and using the determined key regression parameters to predict the adsorption isotherms of gas mixtures with various feed-gas mole fractions. Through the calculation workflow, the density profiles and mole fractions of the adsorbed gases can be determined, from which the absolute adsorption of the gas mixture is estimated. In addition, the CO2/CH4 adsorption selectivity larger than one is observed, illustrating the preferential adsorption of CO2 over CH4 on shale, which implies that CO2 has enormous potential to enhance CH4 production while sequestering itself in shale. Our findings demonstrate that the proposed calculation workflow depending on the multicomponent SLD model enables us to accurately predict the adsorption of gas mixtures in nanopores based on single-component adsorption results. Following the innovative calculation flow path, we could bypass the experimental difficulties of measuring the multicomponent mole fractions in the gas phase at the equilibrium during the adsorption experiments. This study also provides insight into the CO2/CH4 competitive adsorption behavior in nanopores and gives guidance to CO2-enhanced gas recovery (CO2-EGR) and CO2 sequestration in shale formations.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call