Abstract
Two-dimensional (2D) tellurium (Te) is emerging as a promising p-type candidate for constructing complementary metal-oxide-semiconductor (CMOS) architectures. However, its small bandgap leads to a high leakage current and a low on/off current ratio. Although alloying Te with selenium (Se) can tune its bandgap, thermally evaporated SexTe1-x thin films often suffer from grain boundaries and high-density defects. Herein, we introduce a precursor-confined chemical vapor deposition (CVD) method for synthesizing single-crystalline SexTe1-x alloy nanosheets. These nanosheets, with tunable compositions, are ideal for high-performance field-effect transistors (FETs) and 2D inverters. The preformation of Se-Te frameworks in our developed CVD method plays a critical role in the growth of SexTe1-x nanosheets with high crystallinity. Optimizing the Se composition resulted in a Se0.30Te0.70 nanosheet-based p-type FET with a large on/off current ratio of 4 × 105 and a room-temperature hole mobility of 120 cm2·V-1·s-1, being eight times higher than thermally evaporated SexTe1-x with similar composition and thickness. Moreover, we successfully fabricated an inverter based on p-type Se0.30Te0.70 and n-type MoS2 nanosheets, demonstrating a typical voltage transfer curve with a gain of 30 at an operation voltage of Vdd = 3 V.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
