Precision machining of an aluminum alloy piston reinforced with a cast iron insert

Abstract

Bimetallic pistons consisting of aluminum alloy reinforced with a cast iron (CI) insert are used to reduce the weight and improve the wear resistance of pistons. A major problem with machining such bimetallic pistons is producing the desired shape with minimal cutting forces and without damaging the bonding registry. The objective of this paper is to determine the optimal cutting parameters (cutting speed, feed, and depth of cut) for turning bimetallic pistons. When machining, we wish to obtain optimal values of the cutting forces and a better surface integrity while maintaining the required surface finish. Experiments were conducted following Taguchi’s parameter design approach using a cubic boron nitride tool for the machining. The results indicate that the process parameters affected the mean and variance of the cutting force at the Al-CI interface of the piston. The Al-CI interface was examined using an ultrasonic piston bond tester after machining to assure the bond quality. The surface roughness of the components was measured with a surface roughness tester. A mathematical model was developed using the Systat 12.0 software package to establish the relationship between the input quantities (speed, feed, and depth of cut) and the output data (cutting force). The output data of the mathematical model were compared with the experimental results. The results from the Taguchi robust design concept were compared with the results obtained from a nonconventional Genetic Algorithm optimization technique.