Abstract
The paper presents a systematic modelling approach for precision design and numerical control (NC) machining of the tapered ball-end milling (TBEM) cutter that has emerged as a powerful tool for mould-making industries. The major contribution of this work is to produce a complete cutting edge that was conventionally neglected or oversimplified near the ending portion interfacing with the tapered ball end. In order to comply suitably with the requirement for a specific rotating speed, both radial and axial cutting speeds are carefully derived by using a given helical angle defined as the angle between the cutting edge and the revolving axis. Both projected profiles, one normal to the revolving axis and the other tangential to the groove, are used to produce precision sectional profiles of the grinding wheel. In compliance with maximal sectional radius of the taper, the profile of the groove section and the feeding speed of the grinding wheel are computed in sequence. By means of a two-axis NC machine, the shape of the TBEM cutter that possesses a nearly constant helical angle can be systematically designed and produced. With a slightly remedial grinding procedure at the ball end, the dimensional accuracy of the groove and the cutting edge of the TBEM cutter can be well controlled.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
