Abstract
In this article, we present a novel nonlinear vector network analyzer (NVNA) setup for generating and measuring digitally modulated signals at millimeter-wave test bands. The first difference between this setup and commercial NVNAs is the use of a user-defined multisine signal as the phase reference, in order to enable more precise synchronization and denser spectral grid. To achieve this, a single 12.5-GHz microwave source is used for generating both the digitally modulated test signal and the phase reference, which not only offers the clock to the arbitrary waveform generator for user-defined intermediate frequency (IF) waveform generation but also provides the local oscillator drive after frequency multiplication. The second novelty of this work is the use of pulsed-radio frequency (RF) signals for NVNA phase calibration. By replacing the digitally modulated IF waveform with pulsed-RF signals, tone-by-tone phase calibration on dense spectral grids can be easily achieved under the same synchronization scheme. The validity of the proposed NVNA setup (as well as its simplified modification) and the phase calibration method is verified at the fifth-generation (5G)-oriented millimeter-wave bands of 28, 39, 43, and 70 GHz in this work, where the EVM measurements of 64-QAM test signals with a wide range of symbol rates from 0.1 to 1.5625 GSymbol/s are demonstrated reachable in practice.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Microwave Theory and Techniques
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
