Abstract
AbstractIn this study the results of two rainfall‐run‐off simulations were used as input into a MIKE11 GIS and hydrological modelling process for flood inundation mapping based on the flood event (27 September to 8 October 2000) in Malaysia of the Langat River Basin area. Separate inundation maps were generated for the recorded observed rainfall and from a developed quantitative precipitation forecast (QPF), which was based on top of the cloud reflectance and brightness temperature (TB) derive from Advanced Very High Resolution Radiometer (AVHRR) and Geostationary Meteorological Satellite (GMS) satellite data sets. The QPF had rain rates between 3 and 12 mm/h for the 264 h rainfall duration. While the actual recorded rainfall for the same duration was used for the observed. The objective of the study was to compare the similarities of the flood inundation generated from the QPF run‐off with that generated from the rainfall‐run‐off of the actual flood event. The accuracies of the maps were verified using grid point locations of flooded areas taken during the event. The selected sampled point of the verification showed an accuracy of 70% of the QPF on the observed flood map. Sampled points measured flood extent, coverage and depth of flood in the basin area.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
