Abstract
Negative stiffness mechanism has been found able to improve damping performance of dampers on a stay cable which otherwise is limited by the damper installation distance from a cable end. This study provides a practical negative stiffness device (NSD) with adjustable negative stiffness and experiments are performed to validate the negative stiffness effect. The NSD is then combined with a viscoelastic damper in parallel or series for cable damping improvement. Explicit design formulas are derived for optimal design with a target enhancement effect in damping considering the damper described respectively using the Kelvin model and the linear hysteretic damping model. The formulas are verified by analytical and numerical solutions. Parametric analyses show damping enhancement effects of the NSD and it is found more efficient when combined with a damper in series because both deformation amplitudes of the damper and the NSD are further increased in this configuration. Subsequently, case studies are carried out based on two cables of the Sutong Bridge respectively with a shear-type viscous damper and a high damping rubber damper. The results show that the designed NSD can fulfill practical requirements. Particularly, a 100% increase in damping can be achieved by the presented NSD when combined with the damper installed on a cable of 546.9 m long.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
