Abstract
In the roughened surface of 25# steel composite with a plastic layer which consists of PPS、TLCP、TPI and Graphite. The dry friction performance of composite material was tested in room temperature environment. The surface of wear was observed and analyzed by scanning electron microscope. Finally, to analyze the bond strength between the metal material and plastic work layer through the bond strength test. The results showed: the composite material has excellent tribological properties, after the shot peening coarsening in the metal matrix surface can well improve the binding force between plastic layer and metal matrix, the thickness of plastic layer has a certain effect to bond strength, the maximum bond strength was obtained when the thickness of 1.5 mm.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.