Power production enhancement with a polyaniline modified anode in microbial fuel cells

Abstract

In this paper, an approach of improving power generation of microbial fuel cells (MFCs) by using a HSO4− doped polyaniline modified carbon cloth anode was reported. The modification of carbon cloth anode was accomplished by electrochemical polymerization of aniline in 5% H2SO4 solution. A dual-chamber MFC reactor with the modified anode achieved a maximum power density of 5.16Wm−3, an internal resistance of 90Ω, and a start-up time of 4 days, which was respectively 2.66 times higher, 65.5% lower, and 33.3% shorter than the corresponding values of the MFC with unmodified anode. Evidence from X-ray photoelectron spectroscopy and scanning electron microscopy results proved that the formation of biofilm on the anode surface could prevent the HSO4− doped polyaniline to be de-doped, and the results from electrochemical tests confirmed that the electrochemical activity of the modified anode was enhanced significantly after inoculation. Charge transfer was facilitated by polyaniline modification. All the results indicated that the polyaniline modification on the anode was an efficient approach of improving the performance of MFCs.