Abstract
The power output of two straight-bladed vertical-axis wind turbines is simulated using computational fluid dynamics (CFD) as well as analyzed and optimized using the Taguchi method. Five operating factors of incoming flow angle (β), tip speed ratio (λ), turbine spacing (S/d), rotational direction (RD), and blade angle (ϕ) along with four levels are taken into consideration to account for their influences on the performance of the dual turbine system. An orthogonal array of L16 (45) is designed. The profile of extent indicates that the factors λ and β play crucial roles in determining power output, whereas the factor ϕ almost plays no part on the power output. The influence strength order of each factor is featured by λ>β>RD>S/d>ϕ. Furthermore, the analysis of the signal-to-noise (S/N) ratio suggests that the combination of the five factors for maximizing the power output of the system is located at λ=2, β=120°, (clockwise, counterclockwise), S/d =3, and ϕ=0°. With this operation, flow velocity in three regions beyond, below, and between the two turbines is enhanced from their interaction, whereas it drops drastically in the wake regions. Compared to the single wind turbine operated at λ=2 along with the same wind speed (=8ms−1) and counterclockwise rotation, the mean power coefficient (Cp, average) of the dual turbine system operated at the optimal combination is enlarged by 9.97%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.