Abstract
Thermoelectric technology is thought to be a great solution in near future for producing electrical power and recovering low grade waste heat to cut the cost of power generation because of its consistency and eco-friendly affability. Though commercial accessibility of TEG is available currently but heat to electricity conversion efficiency is still low and cost of the module is reasonably high. It’s essential to use the modules competently which is strongly depends on suitable heat exchanger design and selection of proper operating conditions. In this work, TEG module has been selected from the commercially available modules with efficiency of 1.91% for the targeted low-grade waste heat temperature of Th=90°C and Tc=15°C which validated by experiment. Mathematical model has been proposed to simulate TEG based power generation system; the model can predict maximum net power, choose optimum operating conditions and dimensions of heat exchanger. Lab scale design with channel length 1 m, width 0.08 m and gap size 9 mm which is suitable for 50 TEG module (4 mm x 4 mm) have been simulated using proposed mathematical model. For above temperature range, predicted optimum net power was 76.45 W with optimum flow rate 0.94 L/s (56.4 L/min). This lab scale setup will be used for experimental validation of the proposed mathematical model. The obtained results from experiments and simulation are closely matched.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
