Abstract
An LLC-DAB bidirectional converter with reduced switch count as a DC-DC transformer (DCX) is proposed in this paper. It can achieve voltage regulation, full load range zero voltage switching (ZVS) for eight main switches and wide load range ZVS for four auxiliary switches, with consideration of the switch junction capacitors under different power direction. A part portion of total power is transferred through an auxiliary DAB circuit to achieve voltage regulation and bidirectional power conversion. The main power is transferred through LLC circuit with an easy PWM scheme achieving high conversion efficiency. Different from the existing LLC-DAB DCX structure, the two secondary side transformer outputs are in parallel, and connected to the same full-bridge circuit. In this way, the auxiliary DAB circuit can not only adjust the output voltage, but also can inject current into the secondary side to help achieving ZVS of switches without synchronous rectifier (SR) circuit. The converter operation principle is analyzed under different power directions, and ZVS is analyzed with the consideration of all the switch junction capacitors. Based on the analysis, the design consideration is introduced. Finally, a 2-kW prototype with 750V input and 400V output is built up to verify the effectiveness of the proposed solution.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Circuits and Systems II: Express Briefs
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
