Abstract
Model high temperature NbNb 3Al in-situ intermetallic matrix composites have been successfully fabricated using powder metallurgy and arc-melting techniques. Vacuum hot pressing of elemental Nb and Al powders, mixed in the ratio Nb6wt.%Al and synthesized at 1200 °C, yeilded a dual-phase microstructure consisting of equiaxed islands of ductile Nb particles in a brittle Nb 3Al matrix. Subsequent thermal treatment at 1800 °C for 24 h resulted in an alternative composite microstructure with the Nb present in a lamellar morphology following a peritectic transformation, similar to structures obtained via arc-melting and thermal treatment procedures. The precipitation of ductile Nb phase following thermal aging was found to nucleate heterogenously at grain boundaries and to progress along specific growth directions, resulting in a uniform and fine distribution of filamentary Nb within the Nb 3Al matrix. Both equiaxed and lamellar bNb 3Al composite microstructures show improved fracture toughness of about 6 MPa m 1/2 compared with unreinforced Nb 3Al (about 1 MPa m 1/2), principally because of crack bridging and crack renucleation effects induced by the presence of the ductile Nb phase.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
