Abstract
In this work, the processing steps for producing 440C stainless steel parts by means of powder injection molding technique were investigated. The molded specimens were debinded by solvent debinding followed by thermal debinding methods and were sintered under vacuum atmosphere. Effective densification took place in the temperature range 1,230–1,240°C in the sintering. After heat treatment, specimens sintered at 1,240°C for 30 min had the tensile strength of 876.3 MPa, the hardness of 57.7 HRC. Pitting mainly occurred in injection molding 440C stainless steel specimens in NaCl solution. The content of carbon has serious effect on the shape retention. Some methods, such as preventing from oxidation, are presented to avoid the as-sintered specimens from deformation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: The International Journal of Advanced Manufacturing Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
