Abstract
A flow injection system using a tubular electrode based on the redox properties of copper (II) ions occluded in EVA membrane was developed for L-ascorbic acid determination. The poly-ethylene-co-vinyl acetate (EVA 40% m/m) matrix was doped with copper (II) ions and dispersed on the surface of a graphite/epoxy tubular electrode. The electrode showed a super-Nernstian response for L-ascorbic acid concentration between 10-3 and 10-1 mol L-1 with a detection limit of 8.5×10-4 mol L-1, when 0.1 mol L-1 KH2PO4 buffer mixed with 0.1 mol L-1 hydrogen peroxide at pH 5.0 was employed as carrier. The Potentiometric-FIA system allows an analytical frequency of 120 samples per hour with a precision of 3.6%. The results obtained for ascorbic acid determination in pharmaceutical samples, without any previous treatment, were similar to those obtained by the British Pharmacopoeia method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.