Potential Use of Subsurface Drip Irrigation Systems in Landscape Irrigation under Full and Limited Irrigation Conditions

Abstract

Water is an essential component of life in the world. In addition to being crucial to keeping plants alive, water is also used in various areas, such as landscape irrigation, decorative pools, and ponds. The use of water more efficiently is getting more and more important day by day because of the increasing demands of different sectors. In cities with limited water resources, such as Konya, water should be used even more efficiently to reduce irrigation water quantities and prevent water losses. The potential use of the sub-surface drip irrigation method in the irrigation of green areas in Selçuklu district of Konya province was investigated, and the sub-surface drip irrigation method was compared with the fixed sprinkler irrigation method (pop-up) in terms of irrigation parameters (amount of irrigation water applied, plant water consumption) and plant characteristics (germination, plant height, number of mows, mowing weight, root depth). In the present experiments, 18 different sub-surface drip irrigation treatments (100, 80, and 60% irrigations + 40, 60, and 80 cm lateral spacings + 10 and 15 cm lateral depths) and three different sprinkler irrigation treatments (100, 80, and 60% irrigations) were used. Present findings revealed that sub-surface drip irrigation systems were suitable for irrigation of green areas, and this system was more advantageous for municipalities in terms of water savings, irrigation labor, and maintenance. For sub-surface drip irrigation systems, S1 (supply 100% of evaporation from Class-A pan + 40 cm lateral spacing + 10 cm lateral depth) treatments were found to be the best system arrangement for landscape irrigations in Selçuklu district in Konya province.