Abstract
Unsaturated polyester resin synthesized from glycolyzed product of polyethylene terephthalate (PET) waste was used as a matrix to form coconut fiber/polyester composites. PET wastes were recycled through glycolysis and polyesterification reaction to produce a formulation for unsaturated polyester resin (UPR). FTIR spectra of glycolyzed product and prepared resin revealed that cross-links between unsaturated polyester chain and styrene monomer occurred at the saturated sites which resulted in the forming of cross linking network. To improve the adhesion between coconut fiber and polyester resin, various concentrations of alkali, silane and silane on alkalized fiber were applied and the optimum concentration of treatments was determined. The influence of water uptake on the sorption characteristics of composites was studied via immersion in distilled water at room temperature. Surface treatment of coconut fiber caused a significant increase in the tensile properties with the optimum treatment is 0.5 % silane on the 5 % alkalized coconut fiber/polyester composites. It was also observed that the treated fiber composites showed lower water absorption properties in comparison to those of untreated fiber composites. This observation was well supported by the SEM investigations of the fracture surfaces. From the study, it was concluded that polyester reinforced coconut fiber composites derived from recycling polyethylene terephthalate (PET) waste may have the potential application in the fields of construction and automotive interior substrates.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have