Abstract
PurposeThis paper aims to evaluate the inhibitive potential of borage flowers’ aqueous extract (BFAE), Borago officinalis L., against the corrosion of mild steel in 1.0 M phosphoric acid.Design/methodology/approachEvaluation was carried out by chemical hydrogen evolution (HE), mass loss (ML) and electrochemical potentiodynamic polarization (PDP) measurements. SEM-EDX analysis also was used to confirm the existence of the adsorbed film.FindingsIt was found that the inhibition efficiency of BFAE increases with the increase in its concentration, but decreases with the increase in temperature. The potentiodynamic polarization curves indicated that BFAE acts as a mixed-type inhibitor with a predominantly anodic action. The adsorption of BFAE on mild steel surface was found to obey Langmuir and thermodynamic-kinetic adsorption isotherms by forming a thin film on the metal surface. SEM-EDX analysis confirms the corrosion inhibition ability of BFEA in 1.0 M H3PO4 by forming a thin film on mild steel surface. In this study, the inhibitive action of BFAE components is discussed on the basis of the physical adsorption mechanism. The same results were obtained for both the freshly prepared extract and the one that kept in a refrigerator for one year.Originality/valueThis paper indicates that BFAE can act as a good inhibitor for the corrosion of mild steel in 1.0 M H3PO4 even after one year of preparation.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
