Potential of a piezoelectric energy harvester from sea waves

Abstract

A sea wave energy harvester from the longitudinal wave motion of water particles is developed. The harvester consisting of a cantilever substrate attached by piezoelectric patches and a proof mass is used to collect electrical energy owing to the electromechanical coupling effect of the piezoelectric patches from the longitudinal wave motion. To describe the energy harvesting process, a mathematical model is developed to calculate the output charge and voltage from the piezoelectric patches according to the Airy linear wave theory and classical elastic beam model. Results show that the mean value of the generated power increases with the increase in the ratio of the width to the thickness of the cantilever, the wave height, the sea depth (which equals to the cantilever height in this study), the ratio of the proof mass to the cantilever mass, and the ratio of the sea depth to the wave length. A value of the power up to 55 W can be realized for a practical sea wave with the values of the sea depth, wave height and wave length to be 3 m, 2 m, and 15 m, respectively. The collected power harvesting with respect to different categories of the sea waves are provided. Our simulations also show the generated electric power can be further increased by an increase in dimensions of the harvester considering the scale effect. This research develops a new technique for energy harvesting from sea waves by piezoelectric energy harvesters.