Potassium carbonate decomposition modeling within rotating detonation engines for direct power extraction applications

Abstract

Recently, there has been a significant interest in detonation-based combustion systems, such as rotating detonation engines (RDE), due to potential performance advantages in propulsion and energy applications. This includes improvements in thermodynamic efficiency, inherently high gas velocities, and the possibility of achieving an increase in total pressure (i.e. pressure gain) through the combustion process. Due to approximating a constant volume combustion process, these devices also tend to exhibit extremely high local gas temperatures relative to a comparable constant pressure combustor. These advantages overlap well with desirable performance characteristics of direct power extraction (DPE) technologies, such as a magnetohydrodynamic (MHD) generator. Typically, in DPE systems hot combustion products are seeded with an easily ionizable material such as potassium carbonate (K2CO3) in order to boost the electrical conductivity. However, due to the short gas residence times within an RDE, it was unclear whether forming an electrically conductive combustion plasma would be feasible for integration with a downstream MHD generator. A model is presented which describes the heating, decomposition, and ionization of solid K2CO3 particles and aqueous solutions of K2CO3 in water, for a given initial particle diameter. This model was combined with available computational fluid dynamics (CFD) data for an oxygen-methane RDE in a one-way coupled Eulerian-Lagrangian framework to predict particle trajectories and the corresponding heating, decomposition, and ionization histories. Electrical conductivities were computed using a previously developed model, and a method was proposed to determine an equivalent average electrical conductivity. Results show that particle sizes below ∼30 µm are able to fully decompose before reaching the exit of the RDE. While the one-way coupled nature of the simulations precluded rigorous evaluation of the effects of seed material on detonability, a substantial temperature reduction is expected at the detonation wave front due to heating and decomposition. A preliminary comparison is presented between the RDE and an equivalent constant pressure adiabatic combustor, showing a potential performance advantage for the RDE.