Abstract

Is it possible to improve CO2 solubility in potassium carbonate (K2CO3)-based transition temperature mixtures (TTMs)? To assess this possibility, a ternary transition-temperature mixture (TTTM) was prepared by using a hindered amine, 2-amino-2-methyl-1,3-propanediol (AMPD). Fourier transform infrared spectroscopy (FT-IR) was employed to detect the functional groups including hydroxyl, amine, carbonate ion, and aliphatic functional groups in the prepared solvents. From thermogravimetric analysis (TGA), it was found that the addition of AMPD to the binary mixture can increase the thermal stability of TTTM. The viscosity findings showed that TTTM has a higher viscosity than TTM while their difference was decreased by increasing temperature. In addition, Eyring’s absolute rate theory was used to compute the activation parameters (∆G*, ∆H*, and ∆S*). The CO2 solubility in liquids was measured at a temperature of 303.15 K and pressures up to 1.8 MPa. The results disclosed that the CO2 solubility of TTTM was improved by the addition of AMPD. At the pressure of about 1.8 MPa, the CO2 mole fractions of TTM and TTTM were 0.1697 and 0.2022, respectively. To confirm the experimental data, density functional theory (DFT) was employed. From the DFT analysis, it was found that the TTTM + CO2 system has higher interaction energy (|∆E|) than the TTM + CO2 system indicating the higher CO2 affinity of the former system. This study might help scientists to better understand and to improve CO2 solubility in these types of solvents by choosing a suitable amine as HBD and finding the best combination of HBA and HBD.

Highlights

  • CO2 is the primary gas and the best-known greenhouse gas (GHG) contributing to global warming

  • CCUS is a method of capturing CO2 emissions from big industrial facilities including coal, oil, and natural gas combustion plants, as well as other industrial processes, before they are released into the atmosphere

  • S3, S4, and S5 show the Fourier transform infrared spectroscopy (FT-IR) spectroscopy of the single components including K2CO3, Ethylene glycol (EG), and AMPD

Read more

Summary

Introduction

CO2 is the primary gas and the best-known greenhouse gas (GHG) contributing to global warming. It is necessary to reduce CO2 emissions from stationeries especially fossil fuel power plants. Bearing in mind that fossil fuels will continue to be the dominant energy resource in the decades, carbon capture utilization, and storage (CCUS) is essential and the most promising technology to mitigate these problems (Ghaedi et al, 2017d; Hu et al, 2018; Nawar et al, 2019). CCUS is a method of capturing CO2 emissions from big industrial facilities including coal, oil, and natural gas combustion plants, as well as other industrial processes, before they are released into the atmosphere. The post-combustion capture process using solvents is a mature technology for CCUS. Scientists are attempting to find alternate solvents to amines; solvent development is the central part of improving post-combustion CCUS technologies

Objectives
Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call