Post-Fire Mechanical Properties and Hardness of 5083 and 6082 Aluminum Alloys

Abstract

Aluminum alloys are being increasingly used in lightweight transportation applications such as naval vessels and passenger rail. The primary aluminum alloys considered are Al-Mg (5xxx) and Al-Mg-Si (6xxx) due to their mechanical strength, corrosion resistance, and weldability. A major concern in the use of aluminum alloys for lightweight structural applications is fire exposure. Aluminum mechanical properties begin to significantly degrade at temperatures above 300°C. After fire exposure, structural integrity will be governed by the residual, post-fire strength of the aluminum. However, scarce data is available regarding the post-fire mechanical response. The post-fire mechanical properties were characterized for several aluminum alloys: 5083-H116, 6082-T651 plate, and 6082-T6 extrusion. The alloys were exposed to elevated temperatures in a furnace to simulate a fire environment. Tension tests were performed to determine the mechanical response of the alloys. Vickers hardness measurements were also performed on specimens exposed for varying durations and temperatures to quantify the time and temperature-dependent behavior. The observed behaviors were explained in relation to the microstructural strengthening mechanisms for each alloy. Correlations were developed between the mechanical properties and Vickers hardness indentations.