Abstract
The effects of dry cleaning of a HfO2 gate stack using NF3 only and a NF3/NH3 gas mixture plasma were investigated. The plasma dry cleaning process was carried out after HfO2 deposition using an indirect down-flow capacitively coupled plasma (CCP) system. An analysis of the chemical composition of the HfO2 gate stacks by XPS indicated that fluorine was incorporated into the HfO2 films during the plasma dry cleaning. Significant changes in the HfO2 chemical composition were observed as a result of the NF3 dry cleaning, while they were not observed in this case of NF3/NH3 dry cleaning. TEM results showed that the interfacial layer (IL) between the HfO2 and Si thickness was increased by the plasma dry cleaning. However, in the case of NF3/NH3 dry cleaning using 150 W, the IL thickness was suppressed significantly compared to the sample that had not been dry cleaned. Its electrical properties were also improved, including the low gate leakage currents, and reduced EOT. Finally, the finding show that the IL thickness of the HfO2 gate stack can be controlled by using the novel NF3/NH3 dry cleaning process technique without any the significant changes in chemical composition and metal-oxide-semiconductor (MOS) capacitor characteristics.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.