Postbuckling failure of composite plates with holes

Abstract

This paper summarizes a study focused on understanding the failure mechanisms present in a plate with a centrally located circular hole loaded inplane into the postbuckling range of deflections. The study was numerical and experimental in nature and had as a goal the a priori prediction of failure using existing failure data from several sources, together with a stress analysis. The maximum stress failure criterion was used to predict failure and both intra- and interlaminar stresses were considered. Four laminates were considered. The phenomenon of modal interaction, or the jumping from one deformed configuration to another, is discussed. With this jumping, the plate configuration may change from one half-wave in the loading direction to two half-waves in the loading direction. The study concludes that the failure in (+/-45/0/90)2s and (+/-45/2(2))2s laminates is due to fiber compression failure and is predictable. The failure load is, for the most part, independent of response configuration. The (+/-45/0/(6))s laminate fails due to interlaminar shear along the simple support, while the response and failure of the (+/-45)4s laminate is governed to a large degree by material nonlinearities and progressive failure.