Post-fire mechanical properties and constitutive model of Q690 high-strength structural steel

Abstract

Fire hazard is one of the main threats to the integrity of steel structural buildings. Developing an accurate post-fire constitutive model for structural steel is crucial for enhancing the failure assessment of steel structures exposed to fire. In this study, the post-fire mechanical behavior of Q690 high-strength structural steel is investigated. Eighteen round bar specimens made of Q690 steel were heated with temperatures ranging from 20 °C to 900 °C. Tensile tests were conducted on these specimens to obtain the post-fire stress-strain curves and associated mechanical parameters of the material. To accurately characterize the post-fire behavior of Q690 steel, a temperature-dependent elastoplastic constitutive model combined with its numerical implementation algorithm is proposed. This model consists of four components: a temperature-dependent elasticity criterion, the von Mises yield criterion, an associated flow rule, and a temperature-dependent isotropic hardening law. The proposed constitutive model has a notable feature, i.e. the material parameters in the model can be defined as a function of temperature according to the test results. As a result, when utilizing this model for post-fire assessments of steel members, only three routine parameters, i.e. elastic modulus at room temperature, Poisson's ratio, and the temperature experienced by the material, are required in the numerical simulation to generate the material’s stress-strain relationships. To verify the proposed constitutive model, the new model was introduced into the numerical simulations of the tested round bar specimens after exposure to various temperature conditions. Both the load-displacement curves and local deformation of each round bar specimen obtained from the numerical simulations are compared with the test results to validate the accuracy of the new model. The constitutive model presented in this study provides a useful tool for assessing the post-fire behaviors of steel components.