Post-combustion slipstream CO2-capture test facility at Jiangyou Power Plant, Sichuan, China: performance of a membrane separation module under dynamic power-plant operations

Abstract

Abstract Membrane-based separation technologies have the potential to lower the cost of post-combustion CO2 capture from power-plant flue gases through reduced energy and capital costs relative to conventional solvent approaches. Studies have shown promise under controlled conditions, but there is a need for data on performance and reliability under field conditions. Coal-fired power plants in China operate in a dynamic manner, with increases and decreases in output causing changes in flue-gas composition. In this paper, we describe the first field test of a membrane-based post-combustion CO2-capture system connected to a dynamically operating power plant in China. We report the performance of a Membrane Technology Research, Inc. (MTR) PolarisTM membrane-based capture system over a range of plant operating loads ranging from 54% to 84% and conducted an operational stability test over a 168-h period during which the power plant was operating at an average load of 55%, but ramped as high as 79% and as low as 55%. Our results confirm the ability of a membrane capture system to operate effectively over a wide range of host-plant operating conditions, but also identity several issues related to plant integration, system control and resilience in the face of host-plant upsets that require attention as membrane separation systems move towards commercial use.