Possibilities of Utilization of Waste Materials in Production of Electrically Conductive Composites on Silicate Basis

Abstract

The electrical conductivity of concrete can be achieved by adding steel wires or functional fillers. Commonly used fillers are nanotubes, carbon black, nickel powder and so on. These fillers are expensive, but there is a possibility to use waste materials. This is the subject of this experiment. The conductive properties of conductive sand, sludge from the wire drawing process, iron grinding dust waste and waste carbon were verified. From these fillers, waste carbon showed the best electrical properties (impedance). The impedance of the waste carbon was 0.31 Ω and the impedance of the cement composite containing 70% of the weight of waste carbon was less than 670 Ω.