Abstract

One of the effective methods of oil production intensification for heterogeneous Kashiro-Vereyskian clay-carbonate sediments of the Volga-Ural oil and gas bearing province is proppant hydraulic fracturing. Prospects of realization for this technology are considered in the article on the example of the Vereyskian development object of Moskud’inskoye field. Based on the analysis of rocks samples investigations of Vereyiskian sediments, lithological types of carbonate rocks differing in their structural features are distinguished. Tomographic investigations of rock samples were carried out, as a result of which the rock fracturing for some lithotypes was determined and studieds. Under natural geological conditions, depending on the degree of fracturing progression and technological conditions of development, these intervals may or may not be involved in well operation. When hydraulic fracturing is performed, potentially fractured areas that are not in operation can be successfully added to oil production. Based on analysis of hydrodynamic well investigations, the fracturing of the Vereyskian object of the Moskud’inskoye field was studied on the basis of the Warren-Ruth model. With the help of geological and technological indicators of development, prediction fracturing was obtained, which was used for the construction of the natural fracturing scheme. Areas of both pore and fractured reservoirs development were identified on the deposit area. As a result of statistical analysis, the influence of fracturing on efficiency of proppant hydraulic fracturing was determined. Based on the linear discriminant analysis, a statistical model for predicting the efficiency of proppant fracturing was developed. It was shown that in addition to natural fracturing, the results are most strongly influenced by specific proppant yield, formation pressure, permeability of the remote bottomhole zone and skin effect. Based on the developed model, prospective production wells of the Moskud’inskoye field are identified for proppant hydraulic fracturing.

Highlights

  • В последнее десятилетие наибольшее применение для каширо-верейских объектов находит пропантный гидроразрыва пласта (ГРП), который в условиях карбонатных коллекторов характеризуется значительными начальными приростами дебитов нефти и длительностью эффекта во времени [11, 26, 30]

  • Что, помимо естественной трещиноватости, на результаты классификации линейный дискриминантный анализ (ЛДА) в наибольшей степени оказывают влияние: удельный расход пропанта, пластовое давление, проницаемость удаленной зоны пласта (УЗП) и скин-эффект до ГРП

  • В результате проведенного статистического анализа для объекта В3В4 Москудьинского месторождения построена схема естественной трещиноватости пород, которая влияет на эффективность ПГРП

Read more

Summary

Introduction

Возможности учета трещиноватости каширо-верейских карбонатных объектов при планировании пропантного гидроразыва пласта Как цитировать эту статью: Возможности учета трещиноватости каширо-верейских карбонатных объектов при планировании пропантного гидроразыва пласта / А.С.Вотинов, В.В.Середин, И.Ю.Колычев, С.В.Галкин // Записки Горного института. В естественных геологических условиях, в зависимости от степени развития трещиноватости и технологических условий разработки, данные интервалы могут как участвовать, так и не участвовать в работе скважин.

Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call