Abstract
Methodology to assess the potential for energy wood procurement in Russia is described in this article and applied to the Leningrad region. Wood from thinnings, logging residues, non-industrial roundwood and residues from sawmilling are considered as sources for energy production. Energy wood available in the region, based on the 2004 actual cut, is approximately 4 million m3. Nearly 86% of this is non-industrial roundwood and felling residues, and 14% is by-products from sawmilling. Almost two-thirds of the non-industrial roundwood and felling residues are in cutting areas and one-third is in central processing yards. Deciduous tree species (birch and aspen) dominate in energy wood, representing about 65% of the total amount of felling residues and non-industrial wood. It is possible to intensify utilization of forest resources and thereby also to increase the use of wood in energy production. The total amount could be 54% higher if the allowable cut was fully utilized and 124% higher if thinnings were also utilized completely. There are, however, significant intraregional differences, as the current rate of utilization of forest resources varies in the region.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have