Abstract

To reduce the white pollution, the eco-friendly biodegradable poly (butylene adipate-co-terephthalate) (PBAT)-based films had attracted increasing interests worldwide. However, the high-cost of the PBAT had limited the large-scale development and application. In this work, 10 wt% low-cost lignin was introduced into the PBAT to prepare composite films by melt blending and blow molding, and the POSS(epoxy)8 was selected as the compatibilizer to improve the compatibility of PBAT and lignin. The maximum tensile strength and the nominal strain at break subsequently increased by 48.2 % and 21.4 % respectively, while the water vapor permeability enhanced by 9.9 %. Furthermore, the UV aging resistance of PBAT/lignin films were significantly improved, with only 1 wt% POSS(epoxy)8 content. This work provides an efficient strategy to foster the end-user confidence in the low-cost and eco-friendly biodegradable polymer materials with efficient performance.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.