Abstract
This paper investigates the positive bending moment capacity of composite plate girders with various geometric parameters as well as a wide range of concrete slab strengths and steel girder strengths. The elastoplastic cross-sectional analysis method is adopted to efficiently evaluate the positive bending capacity of the composite girder. The constitutive model of the steel girder is specified by a trilinear stress–strain relationship incorporating the strain hardening effect while the concrete slab based on the parabola-rectangle model. A large number of composite sections, which could represent the conventional cross-section of composite plate girders with medium spans, are designed along with various combinations of material strengths. For each composite section, its actual ultimate bending capacity and rigid plastic bending capacity are calculated and compared mutually. The analysis results indicate that the position of the plastic neutral axis has a significant effect on the ratio of the ultimate bending capacity to the rigid plastic bending capacity. The lower position of the plastic neutral axis locates, the more overestimate of the rigid plastic analysis method to predict the ultimate bending capacity. Besides, the yield strength of the steel girder also has an apparent effect on the ratio, of which the higher yield strength of the steel girder could lead to a lower ratio, while the concrete slab compressive strength has less influence on the ratio. The equation of predicting the ultimate bending capacity of the composite plate girder is proposed, in which a bending capacity reduction factor is introduced depending on the strength grade of the steel girder.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.