Abstract
This study aimed to optimize the rope winch of a façade-cleaning robot, a system that travels vertically using the friction between ropes and pulleys. However, position errors can be caused by various factors during locomotion. This adversely affects the robot’s position accuracy. To solve this problem, an experiment was conducted to secure the repeatability of the robot position by optimizing it using the Taguchi method. Subsequently, an error compensation was designed by predicting slip errors of the rope, and accordingly the positional accuracy was determined through feedforward and feedforward + PI control. The experimental optimization confirmed that optimal repeatability can be obtained using a pressure module with the force of 45 N and an axial groove pitch angle of 6° of a pulley. The position accuracy was improved using an error prediction model based on weights, travel distances, and controllers. For a travel distance of 3.0 m, the position error could be reduced to 55%–81% and 72%–89% through feedforward control and feedforward + PI control, respectively, compared with that of the open-loop. The observations of this study could facilitate the control of the position of façade-cleaning robots and aid in the improvement of position accuracy.
Highlights
Skyscrapers with a height of over 150 m exist worldwide [1]
The building façade maintenance robot (BFMR) system requires the installation of a built-in rail on a building, and this can be used by the robots to climb up and down [6]
The position error of mean absolute values was 11-12mm and the RMS values were 17-19mm out of 3.0m and these accounted for 0.4% and 0.6% respectively
Summary
Skyscrapers with a height of over 150 m exist worldwide [1]. These buildings are typically managed by human workers using a single rope or a building gondola. This can endanger the workers and even result in fatal injuries or death. Many researchers have introduced and exploited different types of façade-cleaning robots (FCRs) to replace human workers in such cases. The building façade maintenance robot (BFMR) system requires the installation of a built-in rail on a building, and this can be used by the robots to climb up and down [6]. The installation of an additional gantry outside the building is a challenging and time-consuming process
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
