Abstract
The analysis, design, and microcontroller-based implementation of a digital controller using a Posicast element are presented for the buck converter. Posicast is a feedforward compensator that eliminates overshoot in system response, but the traditional approach is sensitive to variations in natural frequency. The new method described here reduces the undesirable sensitivity by using Posicast within a feedback loop. Compared to classical proportional-integral-derivative (PID) control, the new control results in lower noise in the control signal because the controller has a lower gain at high frequency. Furthermore, the authors' experiments indicate that the new controller is less sensitive to the inherent time delay associated with a digital controller for a dc-dc converter. The authors present a straightforward method to design controller parameters from the small-signal averaged model of the converter dynamics. Experimental results for a PID-controlled converter and Posicast-type controller are also compared.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.