Abstract
In the paper, extrusion process of hollow aluminum profile was simulated using DEFORM-3D; the metal flow velocity of setting baffle-blocks before and after is compared. Three kinds of welding chamber depth of 10 mm, 13 mm, 15 mm were used respectively for extrusion process simulation and got die load varying pattern. Also the strain field and temperature field were analyzed. The results show that the metal flow velocity was more well-distributed by setting A、B、C、D baffle-blocks. When the weld chamber depth is 13 mm, the die load is the smallest. By analyzing the strain field and temperature field,The results showed that the major cause of metal temperature rising in the extrusion process is deformation energy generating in the process of metal plastic deformation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
