Abstract
In this study, extended-gate field effect transistor (EGFET) was applied to fabricate disposable urea biosensor. And the 1.5 V low-voltage instrument amplifier was adopted to realize the portable urea biosensor. However, the difference between extended-gate field effect transistor and traditional ion-selective field effect transistor is the position of the sensitive membrane. The extended-gate field effect transistor was separated into two parts, which are the sensitive membrane and MOSFET. Hence, the MOSFET device can be designed to be a part of the readout circuit and the sensitive membrane was only put in the solution. Therefore, the configuration of the extended-gate field effect transistor can reduce the influence of the temperature, light and the erosion by the solutions. Besides, the configuration can reduce the cost substantially. The configuration of the extended-gate field effect transistor will raise the competitiveness to develop the disposable biosensor. The content of the urea in blood is one of the indexes to diagnose the renal efficiency. Then, the portable urea biosensor is the important expandable aspect. In this study, the gels, which are the poly vinyl alcohol with pendent styrylpyridinium groups, were used to immobilize the urease. The detection of the urea is based on the variation of pH value. Then, the dynamic range of the urea biosensor is from 0.31 to 120 mg/dl at the 5 mM phosphate buffer solution and the response time is about 2 min.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.