Abstract
Screen-printing technology is used to fabricate large dye-sensitized solar cells (DSSCs). The high series-resistance associated with transparent conductive oxide glass substrates causes poor performance in large DSSCs especially at an exposure of 1 sun. The DSSC design has an embedded silver grid; a fluorine-doped tin oxide (FTO) glass substrate and stripe type titanium dioxide (TiO2) active layers introduced by screen-printing. The counter electrode is prepared from a screen printable paste based on hexachloro platinic acid. A DSSC module, which consists of five stripe-type working electrodes on a 5 cm × 5 cm, embedded silver grid FTO glass substrate, shows stable performance with an energy conversion efficiency of 5.45% under standard test conditions. © 2006 Elsevier B.V. All rights reserved.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.