Porous MCM‐41 Silica Materials as Scaffolds for Silicon‐based Lithium‐ion Battery Anodes

Abstract

AbstractAiming for specific energy improvements, lithium‐ion battery (LIB) research explores Si based materials as potential alternatives for the negative electrode/anode. Si exhibits a high specific capacity when lithiated, accompanied by a large volumetric expansion. To mitigate expansion induced failures, composite materials with finely distributed Si inside a scaffold have been established. Potential scaffolds to create such Si composites are nano porous SiO2 materials, such as MCM‐41. MCM‐41 exhibits a fine nanostructure, and the synthesis allows precise tuning of the pore properties and thus, after filling with Si, of Si morphology and Si content in the composite. In this work, insights into relevant MCM‐41 synthesis parameters are acquired, with special attention towards specific pore volumes and pore sizes of the SiO2 powders. Materials characterization is performed using nitrogen sorption analysis, X‐ray scattering, electron microscopy and thermogravimetric analysis. Selected MCM‐41 scaffolds are processed to Si composites and integrated into LIB electrodes. The specific capacity and the stability of the Si−SiO2 composites are evaluated by PITT and galvanostatic cycling. They show capacities above 800 mAh g−1, i. e. more than twice the specific capacity of industry standard graphite, and last over 200 charge/discharge cycles before their capacity loss exceeds 25 %.