Abstract
Porous calcium polyphosphate (CPP) is being investigated for fabrication of novel biodegradable bone substitutes. In this study, porous CPP implants formed by conventional CPP powder packing and using a two-step sinter/anneal process was used to form 20 and 30 vol % porous samples displaying relatively high strength. These were implanted in rabbit femoral condyle sites to study their ability for secure fixation in prepared sites through bone ingrowth. Porous implants of 20 and 30 vol % porosity and displaying compressive strengths ~80 and 35 MPa, respectively, were used. Bone ingrowth sufficient to allow secure implant fixation was observed by 6 weeks (~19% bone ingrowth per available pore space for the 30 vol % and 13% for the 20 vol % porous implants). The results of the in vivo study suggest the potential usefulness of porous CPP as biodegradable bone substitutes/augments in high load-bearing skeletal regions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Biomedical Materials Research Part B: Applied Biomaterials
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.