Abstract
The porous calcium phosphate beads were made by an alginate-interacting Ca ions mechanism on addition of a pore-forming polyethylene (PE) powder at 1250 °C sintering. The nature of the powders and porous beads were analyzed through X-ray diffraction (XRD), Fourier transform infrared spectrometry (FTIR) and heavy metal analysis by inductively coupled plasma-optical emission spectroscopy (ICP-OES). The porous beads size and the pore microstructure characteristics were determined using scanning electron microscopy (SEM). Beside, the porosity analysis was evaluated out using an Archimedes' principle and mercury porosimetry. Then, the sodium ampicillin was penetrated/adsorbed onto calcium-deficient hydroxyapatite porous beads, and was subsequently released in PBS. No matter whether the raw material was HAp, TCP or biphase, the Ca 9(HPO 4)(PO 4) 5OH phase (CDHA) was formed only after sintering. Porous beads of various calcium phosphates with different sizes (0.9–1.1 mm) and pore size groups (60–120 μm and lower than 10 μm) were appeared. The release kinetics of sodium ampicillin from these porous beads have indicated the possibility of using these materials as possible carriers for drug delivery.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.