Abstract
In this study, the keyhole dynamic behavior and molten pool flow were investigated to elucidate the effects of oscillating laser on porosity in narrow-gap oscillating laser-MIG hybrid welding of aluminum alloys. A weld with a porosity of 0.08% was produced at the laser oscillating frequency of 600 Hz and diameter of 1 mm, while 2.27% without oscillating laser. Compared to non-oscillating laser, keyhole opening size increased by about 2.3 times and keyhole depth fluctuation was suppressed. The forces acted on the interface between keyhole wall and molten pool became more balanced. The increased vapor recoil pressure overcame the combined closure effect of gravity and molten pool pressure. While applying oscillating laser, the vortex in molten pool was eliminated and the liquid metal flow was more stable. The combined impact force caused by droplets transfer and liquid metal convection due to constraining effect of narrow gap was buffered, which had less effect on molten pool and keyhole stability. The liquid metal tended to flow from the molten pool inside to surface, which favored the escape of bubbles from the molten pool.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
