Abstract
Cemented tailings find various applications in mining, such as open-pit and underground backfill, dam decommissioning and filtered tailings stacking. This research investigates the compression behaviour of iron ore tailings (IOT) mixed with distinct amounts of Portland cement and compacted in different conditions through isotropic compression, pulse velocity, and unconfined compression tests. The results show the adequacy of the porosity/cement index (η/Civ) in predicting elastic and plastic characteristics of compacted filtered IOT - Portland cement blends, an original correlation that has not been reported by previous work. This index is useful in selecting the cement content and target density for essential parameters required to design cemented IOT stacks. Besides, both cement addition and compaction have promoted the tailings isotropisation (conversion of an anisotropic system to an isotropic one). The evolution of the Post-Yield Compression Line (PYCL) with cementation is shown. Finally, it is demonstrated that distinct initial (after compaction) porosities of uncemented specimens reach a unique PYCL after isotropic pressures above 100 MPa, and cemented specimens do not reach a unique PYCL even at 120 MPa of isotropic pressures. The results underscore the requirement of rigorous compaction control in the field and offer a methodology for the dosage and technological control of artificially cemented tailings.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
