Abstract
The mixed siliciclastic-carbonate rocks of the second member of the Qiketai Formation (J2q2) in the Turpan-Hami Basin are lacustrine tight oil reservoir with vitrinite reflectance values (%, Ro) ranging from 0.64% to 0.81%. X-ray diffraction (XRD), thin sections, field emission scanning electron microscopy (FE-SEM) of argon-milled thin sections, low-temperature N2 adsorption (LNTA), and nuclear magnetic resonance (NMR) analyses were performed to investigate the pore structure characteristics and their influencing factors of the mixed siliciclastic-carbonate reservoirs. The results show that the tight reservoir has a medium-high total organic carbon (TOC) content, and the sedimentary textures include laminated, massive, and intraclasts-rich types. Nanometer scale interparticle pores and microfractures are dominant in the tight reservoirs. The small pores (2–100 nm) make a dominant contribution to the nanoscale storage space according to the comprehensive analysis of the T2 spectra of NMR. Reversed S-shaped isotherms obtained from N2 adsorption are type IV, and hysteresis loops indicate that the shape of pores include slit-or plate-like, ink-bottle-shaped and mixtures of the two. BET surface areas and BJH total pore volume vary from 1.707 m2/g to 8.556 m2/g and 1.13 cm3/100 g to 3.0 cm3/100 g, with an average of 4.31 m2/g and 1.848 cm3/100 g, respectively. The massive and intraclasts-rich rocks have higher NMR porosities, pore sizes and pore volumes than the laminated rocks. Based on the Frenkel-Halsey-Hill model of low-temperature N2 adsorption, the fractal dimensions D1 and D2 are 2.4305–2.7081 and 2.2667–2.6070, respectively. The correlations between the pore structure parameters and the mineralogical composition, TOC content, and fractal dimension reveal that dolomite makes greater contribution to the pore volume and movable fluid saturation than the siliciclastic gains and organic matter, resulting in higher fractal dimensions and more complicated pore structure. In addition, the clay minerals increase pore specific surface area and its complexity in the tight reservoirs. The samples with high silicate mineral and TOC contents tend to contain lower specific surface areas and pore volumes, resulting in lower fractal dimensions and more simplistic pore structure than clay rich samples. Therefore, the complex mineralogical composition, various sedimentary textures and organic matter content all play important roles in the development of pore network.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have